The apartments are equipped with CLAP's clever house system, which saves up to 40% on utility bills, monitors the comfort of the room in the room and the security of the home.
Foundation: foundation slab with root piles.
Structural design: cast-in-situ & frame.
Exterior walls: 250 mm ceramic blocks with 150 mm external thermal insulation, decorative plaster.
Interapartment partitions – 250 mm brick, plastered.
Internal partitions – 100 mm aerated concrete – no finishing.
Bathroom partitions – 120 mm brick, not plastered.
Typical floor height – 3m (floor to floor), 2.7m (net).
Heating system: centralized with apartment wiring.
Heating devices: radiators - steel.
Sanitary devices are not installed.
Electric wiring: copper wire from the counter to the apartment, in the apartment is installed a shield with an opening.
Apartment counters are installed with remote discharging (CLAP system) electricity meters, counters of cold and hot water, heat meters.
Heating system: centralized with apartment wiring provided from the built-in heat point (ITP). The polymer pipes of the heating system from the meters of the apartment and apartment are laid in the floor.
Heating devices: radiators - steel with bottom and side connections.
Ventilation of apartments is carried out with the help of prefabricated reinforced concrete blocks.
Air conditioning - there are places for the installation of external air conditioners. In the outer walls two sleeves d = 50 and 40mm are installed for installation by the investor of drainage pipes, freon and power cable.
Water supply and sewage system - at the entrance to the building a general water-level unit and pumps are installed to maintain proper pressure in the water supply system of the house.
The electricity supply of the residential complex is carried out in accordance with the technical specifications of Kyivenergo. The loading for residential apartments was made according to DBN.V.2.5-23-2010:
10 kW for one-room and two-room apartments.
15 kW for three to six room apartments.
for built-in non-residential premises - 0,15 kW / m.qv.
There are separate water-measuring units for watering and on the built-in premises.
The tubes are not sanitized to ensure the possibility of individual planning of the sanitary unit, sanitary devices are not installed.
Quarterly calculators are installed outside of living quarters in communicating cabinets.
The quarterly counters are equipped with devices for remotely removing indicators.
Apartment units are installed in public places (corridors) in special closed closets, and have the ability to remotely transmit indicators.
The amount of work performed by the head of each apartment includes:
The electric board of the apartment - built into the wall at the entrance, which is installed input automatic machine.
Parking places are provided for the installation of chargers for electric cars.
The house is equipped with passive lightning protection system.
The house has an automatic control system and dispatching of engineering networks.
At the control center, signals from the boiler house, pumps (water supply, heat meters, electricity supply) are outputted.
The following communication and access control systems are provided in the house:
telephony - to the surface boards.
Radiation - to the surface boards.
all technical premises equipped with the alarm system, the signal is output to the control panel in the control room.
The house is equipped with a video surveillance system, which provides reception and processing and transmission, as well as registration and storage of information.
The house is equipped with a complex of fire protection systems.